IMAGE FORGERY DETECTION USING NEURAL NETWORKS 1 to 3 chapters
Best Bakeries in Bangalore (2026 Updated List)
Looking for the best bakeries in Bangalore? Here is a curated list of top bakeries with address, phone number, and Google Maps location. Find the best cake shops near you in areas like Indiranagar, Whitefield, and Koramangala.
Top Bakeries You Must Try
- Aubree – Premium cakes in Whitefield
- Glen's Bakehouse – Popular dessert spot
- Albert Bakery – Famous for puffs
IMAGE FORGERY DETECTION USING NEURAL NETWORKS
Day for day it becomes easier to temper digital images. Thus, people are in need of various forgery image detection. This project present forgery image detection techniques for two of the most common image tampering techniques; copy-move and splicing. This project use match points technique after feature extraction. The detection of tampered regions is done through searching for very similar regions.
Convolutional neural network (CNN) is the machine-learning algorithm which achieved substantial results in image detection and classification. This project develops a new CNN architecture to classify original and masked images checks whether the image is masked or not.
With i) good generalization capability and ii) good execution speed, newly developed CNN architecture is being used as an effective decision-support tool for radiologists in diagnostics. Python is used for development of the project. Here we are extracting the image features and analyzing it to detect the forged images and also determine the type of the forgery.
CONTENTS
|
CHAPTER NO. |
TITLE |
PAGE NO. |
|
|
ABSTRACT |
|
|
1 |
INTRODUCTION |
|
|
|
1.1 Objectives |
|
|
|
1.2 About the project |
|
|
2 |
LITERATURE SURVEY |
|
|
|
2.1 Related Work |
|
|
3 |
SYSTEM ANALYSIS |
|
|
|
3.1 Existing System |
|
|
|
3.2 Drawbacks of Existing System |
|
|
|
3.3 Proposed System |
|
|
|
3.4 Advantages of Proposed System |
|
|
|
3.5 Feasibility Study |
|
|
|
3.5.1 Economical Feasibility |
|
|
|
3.5.2 Operational Feasibility |
|
|
|
3.5.1 Technical Feasibility |
|
|
4 |
System Specification |
|
|
|
4.1 Hardware Requirements |
|
|
|
4.2 Software Requirements |
|
|
5 |
SOFTWARE DESCRIPTION |
|
|
|
4.1 Front End |
|
|
|
4.2 Back End |
|
|
6 |
PROJECT DESCRIPTION |
|
|
|
6.1 Problem Definition |
|
|
|
6.2 Overview of the project |
|
|
|
6.3 Module Description |
|
|
|
6.4 Input Design |
|
|
|
6.5 Output Design |
|
|
|
6.6 System Flow Diagram |
|
|
|
6.7 Use Case Diagram |
|
|
7 |
SYSTEM TESTING |
|
|
8 |
SYSTEM IMPLEMENTATION |
|
|
9 |
CONCLUSION AND FUTURE ENHANCEMENT |
|
|
10 |
APPENDIX |
|
|
|
[1] Source Code |
|
|
|
[2] Screen Shots |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CHAPTER 1
INTRODUCTION
1.1 OBJECTIVES
The main objectives of the project are
· To eliminate the median filter process.
· To make the system effective even when fake content is very low in size.
· To make possible accurate image processing.
· To eliminate manual verification/checking.
· To make CNN the best algorithm so that accuracy will be more.
1.2 ABOUT THE PROJECT
The project is used for fake image detection/classification. Here, the gray scale image is taken. The RGB image if taken, is converted into gray scale image first. Then all the images are resized into same size. Then the training data set images with real image presence ‘yes’ are taken along with ‘no’. For each image, all the pixels’ grayscale value are found out and written in a row.
So the total number of rows is equal to total number of images. The number of columns is the number of pixels in the image. These data is saved in comma separated file. For testing data, all these operations are carried out and saved in another comma separated value file.
Then Convolutional neural network is applied to train the model with test data. The accuracy is found out and displayed. From the given test image, it can be found out as fake data present or not by checking with training data images. In addition, a test image is given and using image processing, checking for fake data is present or not.
CHAPTER 2
LITERATURE SURVEY
2.1 RELATED WORK
2.1.1 LOCALIZATION OF JPEG DOUBLE COMPRESSION THROUGH MULTI-DOMAIN CONVOLUTIONAL NEURAL NETWORKS
AUTHORS
Irene Amerini,
Tiberio Uricchio,
Lamberto Ballan,
Roberto Caldelli
In this paper [1] the authors stated that when an attacker tries to falsify an image, in most of cases she/he will do a JPEG recompression. Various techniques have been developed based on diverse theoretical assumptions but very efficient solutions have not been developed still. Recently, machine learning approaches are started to appear in the image forensics field to solve diverse tasks like acquisition source identification as well as forgery detection. In this case, the aim ahead is to get a trained neural network, given a to-be-checked image, and then to reliably localize the forged areas.
With this in mind, the authors proposed a step forward in this direction with analysis of how a single/double JPEG compression is revealed and localized with the use of convolutional neural networks (CNNs). Numerous kinds of input to CNN are taken into consideration, and experiments were being carried out trying also to prove potential issues to be further investigated. In recent days, the pervasiveness of images and videos as primary source of information led image forensics community to question about reliability and integrity more and more. The context where pictures are involved is still disparate in a social network, magazine, an insurance practice and an evidence for a trial.
Such images are easily altered through with the use of advanced editing software, often minimizing no visual trace of modification, so answering reliably about the integrity becomes fundamental. Image forensics is dealing with these issues through developing technological instruments that allows finding, on the basis of a picture, if that asset is being modified and sometimes to understand what has happened localizing the tampering. Regarding forgeries individuation three are the principal classes of detectors studied so far: those based on features descriptors.
The authors presented here a step forward in this direction. Their objective was to train the neural network, in that, given a to-be-checked image, it should be able to reliably localize the possible forged areas using analysis of presence of single/double JPEG compressed areas. Specifically, various kinds of CNNs-based approaches are being proposed and various inputs to the nets are given. First of all, a spatial domain-based CNN is exploited performing image forgery detection starting from RGB color images; neither pre-processing is carried out nor side information on the borders of tampered area is adopted.
They concluded that they presented a step forward into
adopting convolutional neural networks for the detection task of splicing
forgery. They began to explore CNN capabilities to
classify and localize uncompressed, single and double compressed patches of
images. In the latest case, their approach is also able to recover the original
compression quality factor. They proposed a spatial domain-based CNN and its
combination with a frequency-based CNN into a multi-domain-based approach.
2.12. AN ADAPTIVE NEURAL NETWORK FOR UNSUPERVISED MOSAIC CONSISTENCY ANALYSIS IN IMAGE FORENSICS
QUENTIN BAMMEY
RAFAEL GROMPONE VON GIOI
JEAN-MICHEL MOREL
In this paper [2] the authors stated that automatically
finding suspicious regions in a potentially forged image by splicing,
inpainting or copy-move remains a widely open problem. Blind detection neural
networks trained on benchmark data are flourishing. Yet, these meth-
ods do not provide an explanation of their detections. The more traditional
methods try to provide such evidence by pointing out local inconsistencies in
the image noise, JPEG compression, chromatic aberration, or in the mosaic. In this
paper they developed a blind method that can train directly on unlabelled and
potentially forged images to point out local mosaic inconsistencies. To this
aim they designed a CNN structure inspired from demosaicing algorithms and directed
at classifying image blocks by their position in the image modulo (2 × 2).
Creating a diversified benchmark database using varied demosaicing methods, they
explored the efficiency of the method and its ability to adapt quickly to any
new data.
Detecting image forgeries is a problem with critical applications ranging from the control of fake news in online media and social networks to the avoidance of scientific misconduct involving image manipulation1. Images are easy to modify in a visually realistic way, but those modifications can be difficult to detect automatically.
The most common image forgery techniques are copy-move, both internal and external (splicing), inpainting and enhancement, which may include a modification of the hue, contrast, brightness, etc., of an image to hide objects or change their meaning. The settings in which these images are created and distributed may further alter the image and hinder certain detection methods. For instance, uncompressed images have characteristic demosaicing and noise signatures which are nearly erased by a strong compression.
On the other hand, detection in tampered JPEG images may be based on the inconsistency of JPEG encoding caused by splicing. Yet, this detection method is so efficient that research on counterforensics has been very active and has proposed efficient ways to reinstate a coherent JPEG encoding after forgery. There are two concurrent paradigms for forgery detection techniques. The first way consists in developing many different methods, that address separately the varied forgeries and inconsistencies created by these forgeries. Another possibility is to consider forgery detection as a unique learning problem and develop a structure – usually a neural network – to classify and/or localise forgeries independently of the setup and forgery type.
The most commonly used CFA is by far the Bayer matrix,
which samples two pixels of green for one pixel of red and another of blue.
Although other CFA exist, their use is marginal. As a consequence, we only
consider the Bayer matrix in the article. When an image is forged by copying
part of this image or of another image onto it, there is a 3/4 probability that
the
mosaic of the forged region will not be aligned to that of the main image.
As a consequence, locally detecting the position of the mosaic in images can lead to finding discrepancies caused by forgeries. While detecting the presence of demosaicing can be done reliably with current state-of-the-art methods, the interpretation of these artefacts is still a challenge. Most methods make assumptions of linearity of the interpolation or even assume the colour channels to be independently demosaiced. These assumptions are invalid with most commonly-used demosaicing methods, and even state-of-the-art mosaic detection algorithms thus tend to yield a large number of false positives.
Many different demosaicing algorithms exist,
further-more most of those used in commercial cameras are undisclosed.
Learning-based methods must thus take into ac-
count the impossibility to learn on all existing algorithms. In this paper, they
overcame the above limitations by using an unsupervised convolutional neural
network that learns to detect changes in the underlying pattern of mosaic artefacts.
This network can be trained on unlabelled authentic images to detect forgeries
in new images. Similarly to zero-shot learning, it can also train directly on a
database of potentially forged images to adapt to JPEG compression. The
contributions of our article are three-fold. They created a new convolutional
neural network (CNN) structure tailored to the specific task of mosaic
artefacts detection, and that beats state-of-the-art mosaic detection
methods. They concluded that they have
shown that a small convolutional neural network could be used to accurately
detect and interpret CFA artefacts, and subsequently use them to detect
forgeries in images.
2.1.3. CONSTRAINED CONVOLUTIONAL NEURAL NETWORKS: A NEW APPROACH TOWARDS GENERAL PURPOSE IMAGE MANIPULATION DETECTION
Belhassen Bayar
Matthew C. Stamm
In this paper [3] the authors stated that Identifying
the authenticity and processing history
of an image is an important task in multimedia forensics. By analyzing traces
left by different image manipulations, researchers have been able to develop
several algorithms capable of detecting targeted editing operations. While this
approach has led to the development of several successful forensic algorithms, an
important problem remains: creating forensic detectors for
different image manipulations is a difficult and time consuming process.
Furthermore, forensic analysts need ‘general purpose’ forensic algorithms capable of detecting multiple different image manipulations. In this paper, they addressed both of these problems by proposing a new general purpose forensic approach using convolutional neural networks (CNNs). While CNNs are capable of learning classification features directly from data, in their existing form they tend to learn features representative of an image’s content. To overcome this issue, they have developed a new type of CNN layer, called a constrained convolutional layer, that is able to jointly suppress an image’s content and adaptively learn manipulation detection features.
Through a series of experiments, they showed that their proposed constrained CNN is able to learn manipulation detection features directly from data. Their experimental results demonstrate that our CNN can detect multiple different editing operations with up to 99.97% accuracy and outperform the existing state-of-the-art general purpose manipulation detector. Furthermore, the constrained CNN can still accurately detect image manipulations in realistic scenarios where there is a source camera model mismatch between the training and testing data.
CHAPTER 3
SYSTEM ANALYSIS
3.1 EXISTING SYSTEM AND ITS DRAWBACKS
In existing system, the image is being visualized manually and fake presence is checked by users. Normally the copy-move carried out by copying region of an image and pasting it in another place in the same image, generally to hide unwanted parts of the image. If the part of image is copied to other area of the same image, then it is observed only by manual process. The copy-move attack is one type of tampering in which a region of the image is copied and pasted in another area in the same image to cover an important image feature. Here, only through manual checking, fake presence could be identified. Here, the given test image is checked with data set image and if exact test image match is found with data set fake images collection, then it is treated as fake image.
3.1.1. DRAWBACKS
· Accurate image processing is not possible.
· Manual verification/checking are required.
· Only if exact test image match is found with data set fake images collection, then it is treated as fake image.
3.2 PROPOSED SYSTEM AND ITS ADVANTAGES
In proposed system, the gray scale image is taken. The RGB image if taken, is converted into gray scale image first. Then all the images are resized into same size. Then the training data set image with class factor ‘yes’ for real image are taken along with ‘no’ for fake image. For each image, all the pixels’ grayscale value are found out and written in a row. So the total number of rows is equal to total number of images. The number of columns is the number of pixels in the image. These data is saved in comma separated file. For testing data, all these operations are carried out and saved in another comma separated value file. Then Convolutional neural network is applied to train the model with test data. The accuracy is found out and displayed. From the given test image, it can be found out as real data present or not by checking with training data images.
3.2.2 ADVANTAGES
The proposed system has following advantages.
· Median filter process is not required.
· Effective even when fake content is very low in size.
· Accurate image processing is possible.
· Manual verification/checking are not required.
· CNN is the best algorithm so that accuracy will be more.
3.3 FEASIBILITY STUDY
The feasibility study deals with all the analysis that takes up in developing the project. Each structure has to be thought of in the developing of the project, as it has to serve the end user in a user-friendly manner. One must know the type of information to be gathered and the system analysis consist of collecting, Organizing and evaluating facts about a system and its environment.
The main objective of the system analysis is to study the existing operation and to learn and accomplish the processing activities. The fake image classification with uncertain data through python application needs to be analyzed well. The details are processed through coding themselves. It will be controlled by the programs alone.
3.3.1 ECONOMIC FEASIBILITY
The organization has to buy a personal computer with a keyboard and a mouse, this is a direct cost. There are many direct benefits of covering the manual system to computerized system. The user can be given responses on asking questions, justification of any capital outlay is that it will reduce expenditure or improve the quality of service or goods, which in turn may be expected to provide the increased profits.
3.3.2 OPERATIONAL FEASIBILITY
The Proposed system accessing process to solves problems what occurred in existing system. The current day-to-day operations of the organization can be fit into this system. Mainly operational feasibility should include on analysis of how the proposed system will affects the organizational structures and procedures.
3.3.3 TECHNICAL FEASIBILITY
The cost and benefit analysis may be concluded that computerized system is favorable in today’s fast moving world. The assessment of technical feasibility must be based on an outline design of the system requirements in terms of input, output, files, programs and procedure.
The project aims to detect the given input image is having fake data or not. The system is tested if it is technical feasible to improve the effectiveness of fake data detection using classification routines. The current system aims to overcome the problems of the existing system. The current system is to reduce the technical skill requirements.
CHAPTER 4
Comments
Post a Comment